11130164ah.wordpress.com
November | 2013 | 11130164ah
https://11130164ah.wordpress.com/2013/11
The making of the motorbike. Skip to primary content. Skip to secondary content. Monthly Archives: November 2013. Need to find the angle so i can design a part to hold it in place. November 19, 2013. Front on the bike. I have decided to us a skull in the front to stick with the skeleton idea. November 19, 2013. November 19, 2013. Ribs being welded on. November 19, 2013. November 19, 2013. Forming of the ribs. November 19, 2013. November 19, 2013. Finished Lungs (Previous Post). The Lungs in Place.
11133899cd.wordpress.com
Tank Mount | 11133899cd
https://11133899cd.wordpress.com/2013/12/06/tank-mount
Motorbike project UL 2013-2014. On December 6, 2013. From looking at other peoples blogs and speaking to them about their ideas I decided to try and mount my tank differently. I decided so as to emphasize the Jaguar logo I would hang it underneath the frame using the mount shown in the picture on the left. There is a slot cut out of the jaguar that creates an interference fit so that the tank remains in place. Larr; Front of the Bike. One comment on “ Tank Mount. December 6, 2013 at 5:40 am.
11130164ah.wordpress.com
11130164ah | 11130164ah
https://11130164ah.wordpress.com/author/11130164ah
The making of the motorbike. Skip to primary content. Skip to secondary content. December 6, 2013. I do thing the frame design gives the bike great structure and i do feel all round the bike is very strong. If i had my time back i would have kept the design. I would feel i would make it better but at least I know from doing it I just didn’t make a project I also learned from it. December 6, 2013. December 6, 2013. Finished Lungs (Previous Post). December 6, 2013. The Lungs in Place. December 6, 2013.
11130164ah.wordpress.com
The Lungs in Place | 11130164ah
https://11130164ah.wordpress.com/2013/12/06/the-lungs-in-place
The making of the motorbike. Skip to primary content. The Lungs in Place. December 6, 2013. The lungs were screwed in with wood screws after Donal Ryan showed me the properties of the foam. This entry was posted in Uncategorized. One thought on “ The Lungs in Place. December 6, 2013 at 5:39 am. That looks great. hard concept to get across but you done it. Leave a Reply Cancel reply. Enter your comment here. Fill in your details below or click an icon to log in:. Address never made public).
11130164ah.wordpress.com
11130164ah | The making of the motorbike | Page 2
https://11130164ah.wordpress.com/page/2
The making of the motorbike. Skip to primary content. Skip to secondary content. Newer posts →. The parts i couldn’t powder coat i sprayed myself this included the handle bars, the suspension and the suspension trees. December 6, 2013. Graphite Design of Skull. This was done with acetate. the different layers were cut in each sheet and sprayed on. this was to show the design. I decided against the skull for a finish as it was out of proportion. December 6, 2013. December 6, 2013. December 6, 2013.
eugemurphy.wordpress.com
September | 2013 | bike
https://eugemurphy.wordpress.com/2013/09
A great WordPress.com site. Monthly Archives: September 2013. September 24, 2013. Theme : Caterpillar mining machines. Nice gloss yellow paint. Blog at WordPress.com.
eugemurphy.wordpress.com
December | 2013 | bike
https://eugemurphy.wordpress.com/2013/12
A great WordPress.com site. Monthly Archives: December 2013. Theme : Caterpillar mining machines. December 5, 2013. December 5, 2013. Nice gloss yellow paint. December 5, 2013. December 5, 2013. Welds had to be ground down to a smooth finish. Filler with car filler, heated dry, sanded, re- filled, sanded until all the welds were smooth. Primer sanded for paint to get grip. December 5, 2013. December 5, 2013. Kick stand taken from mini moto, cut and welded link from chain to add to the theme.
eugemurphy.wordpress.com
bushing for sleeve on steering | bike
https://eugemurphy.wordpress.com/2013/12/05/bushing-for-sleeve-on-steering
A great WordPress.com site. Bushing for sleeve on steering. December 5, 2013. The sleeve was loose and was leaving the sleeve a lot of freedom to move around. I made two supports from brass to fit inside the sleeve to give support. these had to bored to diameter 28mm to fit over the inside support. To make the bushings i used aluminium with the same process as the inside supports. Grid for front of bike. Leave a Reply Cancel reply. Enter your comment here. Address never made public).
eugemurphy.wordpress.com
finished bike | bike
https://eugemurphy.wordpress.com/2013/12/05/finished-bike/comment-page-1
A great WordPress.com site. December 5, 2013. Nice gloss yellow paint. Theme : Caterpillar mining machines. 11 thoughts on “ finished bike. December 5, 2013 at 12:36 pm. Absolutely class man. captured ur theme very well. December 5, 2013 at 8:03 pm. December 5, 2013 at 2:12 pm. Ah lad she is CAT…. haha looks class man… nice job… love the lazer cut plastic on the front of the frame. December 5, 2013 at 6:49 pm. December 5, 2013 at 9:07 pm. December 5, 2013 at 9:58 pm. One beast 🙂 Really looks the part!