ajfisher.me
The meandering journey of NodeBots Interchange | ajfisher
http://ajfisher.me/2016/01/26/road-to-interchange
The meandering journey of NodeBots Interchange. Published Wednesday, January 27th 2016. What started as a plan to simply make components work a bit better with NodeBots turned into a way of managing any firmware using JavaScript. A 8 minute read 2.2k words. Its been a long road, and one that has gone down some strange paths at times, but finally node-interchange has hit v1. Interchange was a project that was born out of the Johnny-Five. Hack session that happened after Robots Conf 14. The challenge was t...
robidouille.wordpress.com
Installing Ino on a Raspberry Pi | Robidouille
https://robidouille.wordpress.com/2013/12/26/installing-ino-on-a-raspberry-pi
Installing Ino on a Raspberry Pi. I’ve been buying a lot of Adafruit Neopixels. I don’t have an Arduino Yun unfortunately, but I do have a Raspberry Pi, so I’ll use that instead. We have two options:. Configure a setup similar to the Yun, where we forward the serial port over the network. This requires a separate host computer where we’d run the Aduino IDE, and compile the sketches. The Raspberry Pi would just be a dumb proxy in this case. Is just such a tool. I started off with instructions from here.
stastaka.wordpress.com
Ino(IDEを使わずコマンドラインで使う) | stastaka's Blog
https://stastaka.wordpress.com/2012/11/07/inoideを使わずコマンドラインで使う
Just another WordPress.com weblog. 8220;Ino is a command line toolkit for working with Arduino hardware”. Pip install ino または easy install ino. Ino init -t bink. Lib src sketch.ino. デフォルトはuno, Duemilanove w/ ATmega328だとatmega328など。 Ino build -m atmega328. Ino serial -p /dev/cu.usbmodem* -b 19200. 2016 stastaka's Blog. Stastaka's Blog をフォロー. WordPress.com を使って Web サイトを作成する.
sebs-blog.de
netbeans | Seb's Blog
http://sebs-blog.de/tag/netbeans
NetBeans or other as Arduino IDE – Leonardo. October 15, 2013. Last month I got my arduino leonardo. I had really few time to get into it but the first thing disappointing me was the very minimal IDE delivered with it. I use Linux Mint and there are many alternatives described on the net most didn’t work for me. I use netbeans daily so I wanted to write my code with auto completion. And automated compiling plus uploading. I managed this with a tool called ino. Continue reading →. One comment so far.
friendsoftheunicorn.net
Using Ino | Friends of The Unicorn
http://www.friendsoftheunicorn.net/content/using-ino
Skip to main content. Friends of The Unicorn. Ino is a command line toolkit that can be used instead of the Arduino IDE. The project page is at Inotool. There are some things about the setup that aren't obvious at first and there's a bug in version 0.3.6 that prevents it from working properly on the GertDuino. I'm assuming that you've done all of the setup for the GertDuino and gotten the serial working. The first thing you need to do is install a couple of packages. Sudo pip install ino.
vivithemage.co.uk
Vivi's weblog
http://vivithemage.co.uk/blog
Arduino working delay function. Published at: 12:05 am - Sunday May 11 2014. I recently started actually playing with my arduino a bit more and got to a point where I needed to monitor user input on the device during a delay. Used instead of delay so various things can still be checked (e.g. button presses, saving data). Int workingDelay(int interval) {. Unsigned long previousMillis = millis();. Unsigned long currentMillis = millis();. If(currentMillis - previousMillis interval) {. There is of course one...
robidouille.wordpress.com
Happy New Year | Robidouille
https://robidouille.wordpress.com/2014/01/01/happy-new-year
I’ve been playing a lot with Neopixels. During the holidays. I made a bracelet, a pendant, and earrings. For my wife, and also had a 4m 240 LED strip on display over my window. Here is the library itself: http:/ github.com/robidouille/robidouille/tree/master/Arduino/libraries/NeoPixo. And examples using it: http:/ github.com/robidouille/robidouille/tree/master/Arduino/neopixel. Wait this is all nice and everything, but how do I get the hardware to use this on? Adding a Raspberry Pi. The christmahanukwanz...
robidouille.wordpress.com
January | 2014 | Robidouille
https://robidouille.wordpress.com/2014/01
January 1, 2014. I’ve been playing a lot with Neopixels. During the holidays. I made a bracelet, a pendant, and earrings. For my wife, and also had a 4m 240 LED strip on display over my window. Here is the library itself: http:/ github.com/robidouille/robidouille/tree/master/Arduino/libraries/NeoPixo. And examples using it: http:/ github.com/robidouille/robidouille/tree/master/Arduino/neopixel. Wait this is all nice and everything, but how do I get the hardware to use this on? Adding a Raspberry Pi.
wiki.flav.com
RPi and Arduino Pro mini 3.3V - Flav's Wiki
http://wiki.flav.com/wiki/RPi_and_Arduino_Pro_mini_3.3V
RPi and Arduino Pro mini 3.3V. From Flav's Wiki. Http:/ www.raspberrypi.org/forums/viewtopic.php? Do not run a terminal on the serial: edit. Or any other reference to. Retrieved from " http:/ wiki.flav.com/w/index.php? Title=RPi and Arduino Pro mini 3.3V&oldid=236. This page was last modified on 28 February 2015, at 11:27. This page has been accessed 2,205 times. Content is available under Creative Commons Attribution Non-Commercial Share Alike. About Flav's Wiki.
