3dlprint.com
3 D L P rint » VAT
http://3dlprint.com/category/vat-2
3 D L P rint. Print in 3D with DLP! Archive for the ‘VAT’ Category. Adhesive backing FEP Teflon film. March 4th, 2012. Hi all and again thanks to Ahmet ( from the Yahoo group )for sending a sample to me. I have tested extensively the Adhesive backing FEP Teflon and am abandoning that. Route for now. It seems to have the same problem as straight. Polycarbonate/nylon/Polyethylene. It is difficult to separate the resin ( at. Least mine )without it actually coming off the glass base. You could be using a.
3dlprint.com
3 D L P rint » FEP
http://3dlprint.com/tag/fep
3 D L P rint. Print in 3D with DLP! Posts Tagged ‘FEP’. Adhesive backing FEP Teflon film. March 4th, 2012. Hi all and again thanks to Ahmet ( from the Yahoo group )for sending a sample to me. I have tested extensively the Adhesive backing FEP Teflon and am abandoning that. Route for now. It seems to have the same problem as straight. Polycarbonate/nylon/Polyethylene. It is difficult to separate the resin ( at. Least mine )without it actually coming off the glass base. You could be using a. What helps is ...
3dlprint.com
3 D L P rint » vat
http://3dlprint.com/tag/vat
3 D L P rint. Print in 3D with DLP! Posts Tagged ‘vat’. Adhesive backing FEP Teflon film. March 4th, 2012. Hi all and again thanks to Ahmet ( from the Yahoo group )for sending a sample to me. I have tested extensively the Adhesive backing FEP Teflon and am abandoning that. Route for now. It seems to have the same problem as straight. Polycarbonate/nylon/Polyethylene. It is difficult to separate the resin ( at. Least mine )without it actually coming off the glass base. You could be using a. 2-100mm x 20mm...
3dlprint.com
3 D L P rint » Sorry, but “Comments” have been disabled temporarily.
http://3dlprint.com/2013/06/sorry-but-comments-have-been-disabled
3 D L P rint. Print in 3D with DLP! Sorry, but “Comments” have been disabled temporarily. Sorry, but “Comments” have been disabled temporarily. June 27th, 2013. In an attempt to stop moderating 1000 spam comments every day, I have disabled them temporarily. I’ll see about a Captcha code on the comments page. Those who need to contact me, please use Youtube personal messages with e-mail addresses for reply. Thank You for the understanding temporarily. WIP Flash Curing Resin Printed Objects.
3dlprint.com
3 D L P rint » The Hardware
http://3dlprint.com/the-hardware
3 D L P rint. Print in 3D with DLP! June 27th, 2013. I started with selecting a projector:. DELL 5100MP – http:/ www.projectorcentral.com/Dell-5100MP.htm. It might not be the best for the purpose, but it has a 1400×1050 (only through the Analog VGA connector) native resolution and a 300W P-VIP lamp. The extrusion, that the projector will be mounted to, should have about 50mm on both sides ( the 5100MP is about 330mm wide ) so I have it at 420mm. Bosch-Rexroth Aluminum Extrusions 40×40 Light. Block will m...
3dlprint.com
3 D L P rint » Resin
http://3dlprint.com/category/resin-2
3 D L P rint. Print in 3D with DLP! Archive for the ‘Resin’ Category. WIP Flash Curing Resin Printed Objects. January 13th, 2013. Happy New Year to ALL! Long time no updates. Guilty, but, BUT Here is a WIP Flash curing hardening of the resin printed objects:. Adhesive backing FEP Teflon film. March 4th, 2012. Hi all and again thanks to Ahmet ( from the Yahoo group )for sending a sample to me. I have tested extensively the Adhesive backing FEP Teflon and am abandoning that. March 4th, 2012. Tested it with...
3dlprint.com
3 D L P rint » Printer
http://3dlprint.com/author/symeks
3 D L P rint. Print in 3D with DLP! Sorry, but “Comments” have been disabled temporarily. June 27th, 2013. In an attempt to stop moderating 1000 spam comments every day, I have disabled them temporarily. I’ll see about a Captcha code on the comments page. Those who need to contact me, please use Youtube personal messages with e-mail addresses for reply. You can also reach me on the Yahoo Group http:/ tech.groups.yahoo.com/group/diy 3d printing and fabrication/. Thank You for the understanding temporarily.
3dlprint.com
3 D L P rint » film
http://3dlprint.com/tag/film
3 D L P rint. Print in 3D with DLP! Posts Tagged ‘film’. Adhesive backing FEP Teflon film. March 4th, 2012. Hi all and again thanks to Ahmet ( from the Yahoo group )for sending a sample to me. I have tested extensively the Adhesive backing FEP Teflon and am abandoning that. Route for now. It seems to have the same problem as straight. Polycarbonate/nylon/Polyethylene. It is difficult to separate the resin ( at. Least mine )without it actually coming off the glass base. You could be using a. What helps is...
open3dlp.blogspot.com
Project Open3DLP : June 2013
http://open3dlp.blogspot.com/2013_06_01_archive.html
Friday, June 28, 2013. So, 3D printers are pretty much all the rage these days. BUT it's mainly about FDM or FFF based printers.one form of 3D printing that has kind of gone under the radar is SLA. (Though likely its a patent thing? Or so I'm told? It's the oldest and original method of 3D printing invented by Chuck Hull in the mid 1980's. It's recently gotten some love in the consumer market though, a la FormLabs. A few years ago with the output he was able to get with his home made DLP 3D printer.
3dlprint.com
3 D L P rint
http://3dlprint.com/page/2
3 D L P rint. Print in 3D with DLP! March 4th, 2012. I have tested a few dyes and have settled on one that. Proved most universal. Like many other people have mentioned it here before:. Castin’ Craft dye from Environmental Technologies Inc – eti-usa.com. The only difference is the color – Opaque Yellow. I have tried the transparent amber, yellow, blue, green. Also I have tested Opaque red and yellow. The latter proved a good absorber or. New Video – 4 rings. February 19th, 2012. February 19th, 2012.
SOCIAL ENGAGEMENT