tkkrlab.nl
Laser Cutter - TkkrLab
https://tkkrlab.nl/wiki/Laser_Cutter
Turn on the laser. Put in the material. Don't use the following materials :. PVC plastic of other material containing chlorine,. Teflon or other materials containing fluorine,. Not recommended Polycarbonate (also known as Lexan, it produces a ugly edge and smokes like crazy). If you are not sure you can use this diagram to identify the material. Keep an eye on your job when the laser is working. Don't leave it unattended. For older versions of visicut, download setting for TkkrLab. Turn on the laser.
quake.tokyohackerspace.org
Laser Cutter Resources - Quake.tokyohackerspace.org
http://quake.tokyohackerspace.org/index.php/Laser_Cutter_Resources
From Quake.tokyohackerspace.org. If you don't want to use CorelDraw. Full open source stack. Replacing the board with a GRBL shield (gShield). The laser cutter work surface is a max of 200 x 300 mm. Cooling: Be certain the water is flowing through the laser to the blue water tank below the cutter. Venting: Be sure the vent fan is blowing air out of the large hose. Class notes from June 13,2015. In the CorelLaser CorelDraw laser driver, a LOWER speed (mm/s) actually makes the machine work FASTER. There ar...
