autondt.com

ultracon-service.com.ua

Set of thickness plane-parallel calibration blocks KMT-176 (KUSOT-180)

http://ultracon-service.com.ua/index.php/en/component/k2/item/76-set-of-thickness-plane-parallel-calibration-blocks-kmt-176-kusot-180

Set of thickness plane-parallel calibration blocks KMT-176 (KUSOT-180). Set of thickness plane-parallel calibration blocks KMT-176 (KUSOT-180). Set of ultrasonic thickness calibration blocks KUSOT-180 is intended for examination and for initial inspection at manufacturing plants of ultrasonic contact thickness gauges, operating in a thickness range 0.2300 mm on steel, 1300 mm on duraluminium and 1100 mm on brass and for periodic verification of such thickness gauges. Steel 40H13 Alloy D16. UTG-8 Ultrason...

ultracon-service.com.ua

Calibration Blocks for Surface Defects Detection (Irregular Shape)

http://ultracon-service.com.ua/index.php/en/component/k2/item/64-calibration-blocks-for-surface-defects-detection-of-irregular-shape

Calibration Blocks for Surface Defects Detection (Irregular Shape). Calibration blocks for surface defects detection (of irregular shape). Roughness of operating surface, µm. Intended for setting-up the VD-132-K-IIIU-OKO-01 flaw detector. 140 х 120 х 80. Part of aircraft wheel hub. Test block for wheels testing manufactured by:. SOP TVK B- 1,2,3. Intended for setting-up the VD3-81 Eddycon, VD-132-K-IIIU-ОКО-01. 150 х 130 х100. Part of aircraft wheel hub. Test block for wheels testing, manufactured by.

ultracon-service.com.ua

Set of Calibration Blocks KSO-2

http://ultracon-service.com.ua/index.php/en/component/k2/item/56-set-of-calibration-blocks-kso-2

Set of Calibration Blocks KSO-2. Set of calibration blocks KSO-2 is intended for calibration of ultrasonic flaw detectors by conditional, acceptance and search sensitivity and determining the equivalent defect sizes during ultrasonic testing of semi-finished products made of aluminum alloys. Set of calibration blocks KSO-2 is intended for operation with general-purpose ultrasonic flaw detectors with straight-beam and double crystal probes. Acceptance sensitivity by the reflector effective parameter;.

ultracon-service.com.ua

Probes

http://ultracon-service.com.ua/index.php/en/probes

EDDYCON C Eddy Current Flaw Detector. Eddy current flaw detector…. SONOCON B Ultrasonic Flaw Detector. The Sonocon B flaw…. EDDYCON D Eddy Current Flaw Detector. The EDDYCON D universal…. UTG-8 Ultrasonic Thickness Gauge. The UTG-8 is a…. TUZ-5 Ultrasonic Thickness Gauge. ТUZ-5 portable manual ultrasonic…. ОKО-22М-UT Ultrasonic Multi-Channel Flaw Detector. The ОКО-22М-UT ultrasonic flaw…. OKO-22M-EMA Multi-Channel Flaw Detector. The ОКО-22М-EMA ultrasonic flaw…. TOFD PRO System is….

ultracon-service.com.ua

Training and Certification of NDT specialists

http://ultracon-service.com.ua/index.php/en/training-and-certification-of-ndt-specialists

Training and Certification of NDT specialists. Training and Certification of NDT Specialists. Обзоры принтеров и МФУ. Training Center ULTRACON-SERVICE LLC. Together with the Personnel Certification body PCB UkrSRINDT and Examination Center for non-destructive testing ECNDT PROMPRYLAD LLC offers its services to enterprises and individuals on certification of specialists for I, II and III qualification levels according to standard ISO 9712:2012. Eddy current (ЕТ);. Magnetic particle (МТ);. 1 Casting (c);.

ultracon-service.com.ua

Calibration Blocks with Notches

http://ultracon-service.com.ua/index.php/en/component/k2/item/59-calibration-blocks-with-notches

Calibration Blocks with Notches. Calibration block with flat angular reflectors (notches) are applied for calibration the sweep width and flaw detectors sensitivity during the testing sheet and tubular goods by angle-beam single crystal probes. There are three types of calibration blocks with notches:. Flat for testing of flat items and pipes of large diameters; (Figure 1a). Tubular abutting for testing transverse welded butt welds in pipes; (Figure 1b). А) Flat calibration block;. More in this category:.

ultracon-service.com.ua

UDS2-73 Ultrasonic Double Rail Flaw Detector

http://ultracon-service.com.ua/index.php/en/our-devices/item/31-uds2-73-ultrasonic-rail-flaw-detector-en

UDS2-73 Ultrasonic Double Rail Flaw Detector. UDS2-73 Ultrasonic Double Rail Flaw Detector. Обзоры принтеров и МФУ. Rail complete sounding (excluding the foot flanges), due to the flaw detector multi-channeling;. Built-in standard setups for channels operation;. Defining the traveled distance and motion speed during the complete testing;. Real-time display of testing results in B-Scan mode (by 4 channels);. Recoding the testing results at different sensitivity levels;. Flaw detector distinctive features.

ultracon-service.com.ua

Ultrasonic Calibration Block V1

http://ultracon-service.com.ua/index.php/en/component/k2/item/57-ultrasonic-calibration-block-v1

Ultrasonic Calibration Block V1. Calibration block V1 is intended for ultrasonic flaw detectors calibration during ultrasonic testing of welded joints quality and corresponds to DSTU 4002-2000 (ISO 2400, DIN 54120, B. S. 2704). V1 calibration block allows to:. Determine the index point of ultrasonic oscillations and ultrasonic x-value with an error 0.5 mm;. Determine the probe angle of ultrasonic oscillations with an error 1 angl. degrees;. Determine the sweep linearity of UT flaw detectors horizontally;.

ultracon-service.com.ua

Articles

http://ultracon-service.com.ua/index.php/en/articles-en

In-Service Inspection of Aircraft Blocks Using Eddy Current Flaw Detector EDDYCON C. For regular flights many…. EDDYCON C Eddy Current Flaw Detector. Eddy current flaw detector…. SONOCON B Ultrasonic Flaw Detector. The Sonocon B flaw…. EDDYCON D Eddy Current Flaw Detector. The EDDYCON D universal…. UTG-8 Ultrasonic Thickness Gauge. The UTG-8 is a…. TUZ-5 Ultrasonic Thickness Gauge. ТUZ-5 portable manual ultrasonic…. ОKО-22М-UT Ultrasonic Multi-Channel Flaw Detector. The ОКО-22М-UT ultrasonic flaw….