test.bibra.com
Webstar Zero | BIAGOSCH & BRANDAU GmbH & Co. KG
http://test.bibra.com/products/stamping-presses/webstar-zero
The innovative future of sheet feeding – Webstar Zero. The Webstar Zero stands for:. A safer and more accurate sheet feeding. A better material utilization. This is possible due to our patented 4 axis roller feeding system, model TPS . This system works with AC servo motors and ball screw drive with zero clearance for the x-axis only. O-frame press in solid welded construction. 18 – 100 t metric tons capacity with crank shaft angle of 20 degrees to dbc. Direct flywheel drive or geared drive. Ø 82,3 mm.
test.bibra.com
Gunstar | BIAGOSCH & BRANDAU GmbH & Co. KG
http://test.bibra.com/products/lining_machines/gunstar
The ends stacked in a magnetic floating magazine are separated by a ratchet feeder and fed automatically into the lining station. Here the end revolves under an electro-pneumatic nozzle head which applies the sealing compound. The opening time of the nozzle is adjusted by an electronic timer. These lining machines are available in single or dual lane design and if requested also for aluminium products with vacuum chamber.
test.bibra.com
Disc feed press | BIAGOSCH & BRANDAU GmbH & Co. KG
http://test.bibra.com/products/stamping-presses/strip-feed-press
test.bibra.com
Pocket oven | BIAGOSCH & BRANDAU GmbH & Co. KG
http://test.bibra.com/products/drying-ovens/pocket-oven
Single lane or dual-lane vertical drying ovens for drying or curing of WBC- compounds in lids or in special design these ovens can be also delivered for repair coatings of easy-open lids with up to 4 lanes. All ovens can be supplied with electrical or gas heating. The oven works as a convection dryer with horizontal laminar air-flow. The pocket oven forms a working unit together with a synchronised compound lining machine. The pocket system transports products in safe and non-abrasive manner.
test.bibra.com
Coil feed press | BIAGOSCH & BRANDAU GmbH & Co. KG
http://test.bibra.com/products/stamping-presses/coil-feed-press
test.bibra.com
Webstar ZeroZeroOne | BIAGOSCH & BRANDAU GmbH & Co. KG
http://test.bibra.com/products/stamping-presses/webstar-zerozeroone
Our fastest edition Webstar Zero Zero One. Press equipped with rotatory mass balancingfor a speed up to 300 strokes per minute. Suitable for single- and double row tools and multi dies. Dynamic ejection system with automatic fine tuning of the ejection angle. About Webstar Zero Zero One :. Speed 60 – 300 strokes per minute. Efficient noise and vibration reduction by completely bedded machine unit. Active cooling system of important parts for reducing linear thermal expansion.
test.bibra.com
Rotarystar | BIAGOSCH & BRANDAU GmbH & Co. KG
http://test.bibra.com/products/lining_machines/rotarystar
Suitable for compound- lining of round ends. Very solid and sturdy closed machine body in welded steel construction. Gears and curves running in oilbath, infinitely variable speed drive by frequency controlled AC motor. Compounding chucks are rotating constantly, independent from the machine speed by means of power transmission by differential gear. The high duty injection guns, working electro-pneumatically, are equipped with electronic injection timing units. Diameter range for lids / bottoms.
test.bibra.com
Multistar | BIAGOSCH & BRANDAU GmbH & Co. KG
http://test.bibra.com/products/curling-lining-beading/multistar-ag
The machine is designed for curling and lining of large round pail lids in flat edge or pre-curled design or for difficult curling operations. For plug lids the machine is equipped with a further station for beading. The machine is built in modular design with 2, 3 or 4 working stations:. 2 Curling station with one curling roller. 3 Beading station with beading roller.
test.bibra.com
Products | BIAGOSCH & BRANDAU GmbH & Co. KG
http://test.bibra.com/products
Bibra is one of the world leading companies in building machines and complete lines to produce bottoms and lids for all types of round and non-round cans, rings for paint cans, deep drawn cans, cosmetic cans, aerosol bottoms and cones, cookie cans and also caps and closures.
test.bibra.com
Round curlers | BIAGOSCH & BRANDAU GmbH & Co. KG
http://test.bibra.com/products/curlers/round-curlers
The lids will be transported directly to the curling disc by means of integrated infeed belts. The output of the curler can be regulated by an infinitely variable speed drive. The change over of one size to another is quick and easy. Segments and curling discs are hardened and diamond ground for very precise curling results. Curlers can be also supplied as twin curlers with two stations side by side. 30 – 83 mm. 50 – 127 mm. 45 – 189 mm. 170 – 225 mm. Output each curling station.
SOCIAL ENGAGEMENT