crowstudio.se
MCU | CrowStudio
http://crowstudio.se/tag/mcu
Skip to primary content. Skip to secondary content. ATtiny85 – RC switch. I have finally managed to program an ATtiny85 to act as a RC switch! The switch will work as a “poor-man’s-ESC-reverse”. I bought a cheap ESC for my Ballbot Project. And it has no reverse mode, it is made for RC aeroplanes, so I have to implement a relay that acts as a “polarity-switch” to be able to make a reveres motion on the motors. Continue reading →. Proudly powered by WordPress.
crowstudio.se
AVR | CrowStudio
http://crowstudio.se/tag/avr
Skip to primary content. Skip to secondary content. ATtiny85 – RC switch. I have finally managed to program an ATtiny85 to act as a RC switch! The switch will work as a “poor-man’s-ESC-reverse”. I bought a cheap ESC for my Ballbot Project. And it has no reverse mode, it is made for RC aeroplanes, so I have to implement a relay that acts as a “polarity-switch” to be able to make a reveres motion on the motors. Continue reading →. Proudly powered by WordPress.
crowstudio.se
RC | CrowStudio
http://crowstudio.se/tag/rc
Skip to primary content. Skip to secondary content. ATtiny85 – RC switch. I have finally managed to program an ATtiny85 to act as a RC switch! The switch will work as a “poor-man’s-ESC-reverse”. I bought a cheap ESC for my Ballbot Project. And it has no reverse mode, it is made for RC aeroplanes, so I have to implement a relay that acts as a “polarity-switch” to be able to make a reveres motion on the motors. Continue reading →. Ballbot – new parts. Starting to look like a ball! Continue reading →. I had...
crowstudio.se
openHardware | CrowStudio
http://crowstudio.se/tag/openhardware
Skip to primary content. Skip to secondary content. 555 TARDIS – Space Hangar Guiding-lights. Nothing special, just two flashing LEDs. Continue reading →. 555 TARDIS – Noise Synth. Made a funny-sounding little noise synth with the 555 TARDIS v1.0. Continue reading →. New PCBs have arrived! I have made two new PCBs, a 16 LED-scanner card and a new version of the 555 TARDIS, looks pretty good I think! 16-LED CYLON/KITT-Scanner v1.0 – front. 16-LED CYLON/KITT-Scanner v1.0 – back. Continue reading →. I had t...
crowstudio.se
electronics | CrowStudio
http://crowstudio.se/category/electronic-sfx
Skip to primary content. Skip to secondary content. ATtiny85 – RC switch. I have finally managed to program an ATtiny85 to act as a RC switch! The switch will work as a “poor-man’s-ESC-reverse”. I bought a cheap ESC for my Ballbot Project. And it has no reverse mode, it is made for RC aeroplanes, so I have to implement a relay that acts as a “polarity-switch” to be able to make a reveres motion on the motors. Continue reading →. 555 TARDIS – Space Hangar Guiding-lights. Continue reading →. Before doing a...
crowstudio.se
openSoftware | CrowStudio
http://crowstudio.se/tag/opensoftware
Skip to primary content. Skip to secondary content. ATtiny85 – RC switch. I have finally managed to program an ATtiny85 to act as a RC switch! The switch will work as a “poor-man’s-ESC-reverse”. I bought a cheap ESC for my Ballbot Project. And it has no reverse mode, it is made for RC aeroplanes, so I have to implement a relay that acts as a “polarity-switch” to be able to make a reveres motion on the motors. Continue reading →. Proudly powered by WordPress.
crowstudio.se
ATtiny85 | CrowStudio
http://crowstudio.se/tag/attiny85
Skip to primary content. Skip to secondary content. ATtiny85 – RC switch. I have finally managed to program an ATtiny85 to act as a RC switch! The switch will work as a “poor-man’s-ESC-reverse”. I bought a cheap ESC for my Ballbot Project. And it has no reverse mode, it is made for RC aeroplanes, so I have to implement a relay that acts as a “polarity-switch” to be able to make a reveres motion on the motors. Continue reading →. Proudly powered by WordPress.
crowstudio.se
Ballbot | CrowStudio
http://crowstudio.se/tag/ballbot
Skip to primary content. Skip to secondary content. ATtiny85 – RC switch. I have finally managed to program an ATtiny85 to act as a RC switch! The switch will work as a “poor-man’s-ESC-reverse”. I bought a cheap ESC for my Ballbot Project. And it has no reverse mode, it is made for RC aeroplanes, so I have to implement a relay that acts as a “polarity-switch” to be able to make a reveres motion on the motors. Continue reading →. Ballbot – new parts. Starting to look like a ball! Continue reading →. I had...
crowstudio.se
555 | CrowStudio
http://crowstudio.se/tag/555
Skip to primary content. Skip to secondary content. 555 TARDIS – Space Hangar Guiding-lights. Nothing special, just two flashing LEDs. Continue reading →. 555 TARDIS – Noise Synth. Made a funny-sounding little noise synth with the 555 TARDIS v1.0. Continue reading →. New PCBs have arrived! I have made two new PCBs, a 16 LED-scanner card and a new version of the 555 TARDIS, looks pretty good I think! 16-LED CYLON/KITT-Scanner v1.0 – front. 16-LED CYLON/KITT-Scanner v1.0 – back. Continue reading →. Origina...
crowstudio.se
CrowStudio | LeftWing SFX | Page 2
http://crowstudio.se/page/2
Skip to primary content. Skip to secondary content. Newer posts →. Ballbot – propel concept. Another post is up, about the propel system this time! I have this idea that the ball will be driven with a motor and a small wheel inside a bigger ring, with a friction wheel underneath. Sorry for my bad sketch. Continue reading →. Ballbot – final test piece…? Finally I think we nailed the printing tolerance measurements! Continue reading →. Ballbot – receiver and ESC’s. Continue reading →. We took a look at my ...
SOCIAL ENGAGEMENT