wtware.com
First steps. All terminal boot ways - Windows Terminal Ware.
https://wtware.com/docs5/boot.html
First steps. All terminal boot ways. WTware includes operating system and all needed drivers. That's why WTware works without Windows and can't be started "from Windows". WTware runs on a computer with no operating system. WTware can be boot by any way you can technically boot computer. During boot WTware:. Loads it's binaries from disk or downloads from TFTP server by network. Reads from disk or receives from DHCP server by network IP-address and other network settings. Boot from USB flash disk. Utility...
wtware.com
OpenVPN configuration - Windows Terminal Ware
https://wtware.com/openvpn.html
Is a free and open source software application that implements virtual private network (VPN) solutions for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. Full manual for OpenVPN installation and configuration you can find at manufacturer site: openvpn.net. Connecting to working OpenVPN. Rename tested configuration file to. And place it to. Stored in configuration file. Add in configuration file line:. If in your VPN. Key-direct...
wtware.com
Windows Terminal Ware, hardware requirements.
https://wtware.com/hardware.html
Serial port (COM-port) redirection. Suffix of " video. Parameter value in configuration file determines, which of four available packages. Will be loaded. Different packages use different graphics library:. 143 graphics library. Is meant for the oldest computers with CPU upwards of i486 and RAM 8Mb and old video-cards (ISA- and PCI-cards). Approximate list see here. Uses new X.org. Version. Supports majority o modern video cards. Ethernet: supported almost all 100-mb and majority of built-in gigabit cards.
wtware.com
Windows Terminal Ware, hardware requirements.
https://wtware.com/hwcomplist.html
Serial port (COM-port) redirection. Suffix of " video. Parameter value in configuration file determines, which of four available packages. Will be loaded. Different packages use different graphics library:. 143 graphics library. Is meant for the oldest computers with CPU upwards of i486 and RAM 8Mb and old video-cards (ISA- and PCI-cards). Approximate list see here. Uses new X.org. Version. Supports majority o modern video cards. Ethernet: supported almost all 100-mb and majority of built-in gigabit cards.
wtware.com
Windows Terminal Ware. Boot by network. dhcp and tftp services optimization.
https://wtware.com/netman/netman1.html
Boot by network. dhcp and tftp services optimization. Tftpd32 utility recommended for fast start is insufficiently fucntional for a commercial application. We strongly recommend to use the services included into the Windows Server distributive. They are rather more complex-configurable, but have all the necessary functionality and highly reliable. New scope creation starts so:. It is clear, that IP-addresses, network mask and the number of addresses in the scope will be different in each case. I reco...
wtware.com
Audit - Windows Terminal Ware
https://wtware.com/docs5/audit.html
If you have any comments or remarks to this article, please, let us know. 2003–2016 wtware.com.
wtware.com
DHCP configuration - Windows Terminal Ware
https://wtware.com/docs5/dhcp.html
Dynamic Host Configuration Protocol (DHCP, currently implemented as DHCPv6) is a client-server networking protocol. A DHCP server provides configuration parameters specific to the DHCP client host requesting, generally, information required by the client host to participate on an IP network. DHCP also provides a mechanism for allocation of IP addresses to client hosts. Full Microsoft DHCP configuration manual is available at the WTware site. Requires to set several DHCP parameters:. In Unix DHCP set:.
wtware.com
Windows Terminal Ware. Network Level Authentication.
http://wtware.com/win/nla.html
By default Windows 2012 Server requires terminal services clients to support Network Level Authentication. Up to 5.2.12 version WTware didn't support this feature. Install new WTware version or turn off NLA requirement on server. To turn off NLA requirement run on server Local Group Policy Editor (for server from domain you can use domain policies):. Change only one setting:. 2003–2016 wtware.com.
wtware.com
WTware terminal configuration file. Terminal features, parameters and their descriptions - Windows Terminal Ware.
https://wtware.com/docs5/config.html
WTware terminal configuration file. Terminal features, parameters and their descriptions. Server and session parameters. Shared disk, disk. Sound, sound level, sound control, sound rate, sound buffer. Microphone, microphone level. SIP usb sound level. Display, M2 display, M2 position. Mouse accel mult, doubleclick. Vnc, vnc password. Server and session parameters. Server=192.168.1.1 server=ts1.local server=ts3.local:4000. Possible protocol values are:. User can enter server address manually. Specify:.
wtware.com
Windows Terminal Ware. Printer connection.
https://wtware.com/win2k3/printer.html
Don't forget to set the option. In the terminal configuration file and make certain that printer test,. Command, works correctly. Run the printer setup master from the folder "Printers". Choose "Local printer" and set Plug and Play flag off. Create a new port, type: Standart TCP/IP Port. The port name is just a memo for the administrator. End of the port creation:. Now you can set drivers for YOUR printer. Printing from DOS to lpt1 port. Net use lpt1 servername printername. If server physical port lpt1 i...
