OILFIELDPIX.COM

drillingformulas.com

Accident of Jack Up Rig Offshore Mexico - Results In 2 Fatality, At Least 10 Injured‎

http://www.drillingformulas.com/accident-of-jack-up-rig-offshore-mexico-results-in-2-fatality-at-least-10-injured

Cement Squeeze and Cement Balanced Plug Spreadsheet Free Download ». Accident of Jack Up Rig Offshore Mexico – Results In 2 Fatality, At Least 10 Injured. May 7, 2015. May 5 (Reuters) – Mexican oil company Pemex said an accident on Tuesday has left an offshore maintenance rig in the southern Bay of Campeche listing, killing two workers, but has not affected crude production. It earlier reported that two workers had suffered minor injuries. Local media put the injured toll at 28 workers. A Pemex spokesman...

drillingformulas.com

Drill String

http://www.drillingformulas.com/category/drill-string

Category Archives: Drill String. Vibration Mechanisms In Drillstring by SperrySun. September 27, 2015. Continue reading →. Using Combined Load Chart For Stuck Pipe Situation. June 20, 2015. For this example, we use 5 DP, S-135, NC50 (4-1/2 IF connection) to be a reference figure. Pipe Size and Weight: 5.000″ 19.50ppf 0.362″ wall IEU. Tool Joint: 6.625″ X 3.250″ NC50. Tool Joint 120,000 psi Material Yield Strength. Continue reading →. Tagged Combined Load Chart. January 5, 2014. Stress (σ) = F/A. Basic Un...

drillingformulas.com

Bullheading Well Control Method‎

http://www.drillingformulas.com/bullheading-well-control-method

Oil & Gas Well Casing – VDO Training. How Much Force Applied to Rig Tong To Get The Right Torque at The Connection ». Bullheading Well Control Method. June 22, 2014. June 22, 2014. Is one of the well control methods which may be utilized in some occasions in order to control the well. Concept of bullheading is to pump kicks back into formations by using kill weight fluid. People usually use this method when normal circulation is impossible and volumetric method is not feasible to perform. For every drill...

drillingformulas.com

Book Review

http://www.drillingformulas.com/category/book-review

Category Archives: Book Review. The Bit – Rotary Drilling Book Review. October 26, 2013. There are not many books about drilling bits in the market. Today, I would like to share with you about this book, The Bit which is a very good book in the rotary drilling series. The book is written in a simple language therefore everyone can understand this topic so easy. Continue reading →. Drilling Fluids, Mud Pumps, and Conditioning Equipment Book Review. January 19, 2012. What will you learn from this book?

drillingformulas.com

Drilling Fluid Calculations

http://www.drillingformulas.com/category/drilling-fluid-calculations

Category Archives: Drilling Fluid Calculations. Do you have too much slug in the well? June 11, 2012. June 11, 2012. Slug is heavy drilling mud that is used to pump when you want to pull pipe dry. However, excessive volume of slug in the well can create higher mud weight and cause the problem. Today I would like to share my experience regarding slug in the well. The situation happened on the drilling rig like this. Do you know what went wrong? The two slugs in the well cause us trouble. April 16, 2012.

drillingformulas.com

Leaving Time Calculator for Oilfield Personnel‎

http://www.drillingformulas.com/leaving-time-calculator-for-oilfield-personnel

Hole Monitoring Procedures While Drilling or Milling Operation. Hole Monitoring Procedures While Tripping ». Leaving Time Calculator for Oilfield Personnel. July 24, 2015. I’ve got a very funny Excel spreadsheet – Leaving Time Calculator for Oilfield Personnel. Basically, the file will plot a hump curve showing where you are in your working hitch. 8211; Leave Calculator. What you need to input? Date Joined Rig the format is Date-Month-year. Trip Length how many day on the rig as per your schedule. You ca...

drillingformulas.com

Hole Monitoring Procedures While Drilling or Milling Operation‎

http://www.drillingformulas.com/hole-monitoring-procedures-while-drilling-or-milling-operation

Well Flowing After Disconnecting The Wireline Lubricator Well Control Situation. Leaving Time Calculator for Oilfield Personnel ». Hole Monitoring Procedures While Drilling or Milling Operation. July 19, 2015. July 19, 2015. This is the example of hole monitoring procedure while drilling or milling and this will give you some ideas only. You need to adjust it to suit with your operation. Perform pre-job safety meeting with personnel involved in operation. A drilling parameter trend sheet will be updated ...

drillingformulas.com

Well Flowing After Disconnecting The Wireline Lubricator – Well Control Situation‎

http://www.drillingformulas.com/well-flowing-after-disconnecting-the-wireline-lubricator-well-control-situation

Blowout Preventers (BOP) VDO Training. Hole Monitoring Procedures While Drilling or Milling Operation ». Well Flowing After Disconnecting The Wireline Lubricator Well Control Situation. July 19, 2015. July 19, 2015. Please watch the footage below. It was a flow back after breaking out the lubricator on the rig floor. What Could be Done Better? These are some key learning points that we can learn from this VDO. What Are Your Thought about This Case? Articles You May Like:. Hole Monitoring Procedures While...

drillingformulas.com

Drilling Formulas and Drilling Calculations - Part %Page%

http://www.drillingformulas.com/page/2

Newer posts ». Coiled Tubing Equipment Overview. August 14, 2016. August 14, 2016. Introduction to Coiled Tubing (CT) in Oil and Gas. Figure 1 shows the mounted truck coiled tubing unit, which is normally used for the land operation and Figure 2 is the coiled tubing unit used for operating in an offshore environment. Figure 1 – Coiled Tubing Unit on a Truck (Courtesy of Stewart and Stevenson). Figure 2 – Offshore Coiled Tubing Unit (Courtesy of NOV). Continue reading →. August 14, 2016. August 15, 2016.