gandmprecision.co.uk
G & M Precision Plastics Ltd PTFE - G & M Precision Plastics Ltd
http://www.gandmprecision.co.uk/ptfe
8212; Main Menu —. A Flouronated Polymer exibiting extreme chemical resistance and a wide operating temperature range combined with excellent dialitic performance, surface properties of low friction and anti adhesion. These characteristics enable it to operate successfully in demanding applications and in some cases extreme conditions unlikely to be met by any other material. 8211; Improved wear and creep resistance. GL15 & 40. 8211; Adjusted quantity of filler. Stable -260 c to 260 c.
gandmprecision.co.uk
G & M Precision Plastics Ltd Acetal Copyolymer
http://www.gandmprecision.co.uk/acetal-copyolymer
8212; Main Menu —. Both Copolymer (Acetal) and Homopolymer (Delrin) grades are similar in there overall balance of properties although each shows some difference from the other in detail. In general, the mechanical properties of the Homopolymer (Delrin) are slightly superior to the Copolymer (Acetal) although the latter has a higher continuous operating temperature. High crystaline with low water absorption. Better dimensional stability and creep resistance than nylons. Easy to machine to tight tolerances.
gandmprecision.co.uk
G & M Precision Plastics Ltd Nylon 12
http://www.gandmprecision.co.uk/nylon-12
8212; Main Menu —. Nylon 12 has better chemical resistance and higher impact strength than both Nylon 6 and Nylon 66 but has lower mechanical strength, hardness and wear resistance. Nylon 12 absorbs very little water and maintains good dimensional stability. Glass filled Nylon 12 can reduce linear expansion by 20% and may also improve the heat distortion properties, compressive shear and tensile strength by up to 50%. It has a continuous working temperature of 120 c. Excellent strength to weight ratio.
gandmprecision.co.uk
G & M Precision Plastics Ltd Gallery
http://www.gandmprecision.co.uk/gallery
8212; Main Menu —. To get in touch, call us on 0141 952 7461 or fill in the contact form below. G & M Precision Plastics. Unit 2 Fleming Court. Copy 2014 G and M Precision Plastics.
gandmprecision.co.uk
G & M Precision Plastics Ltd Tufnol - G & M Precision Plastics Ltd
http://www.gandmprecision.co.uk/tufnol
8212; Main Menu —. High strength to weight ratio. To get in touch, call us on 0141 952 7461 or fill in the contact form below. G & M Precision Plastics. Unit 2 Fleming Court. Copy 2014 G and M Precision Plastics.
gandmprecision.co.uk
G & M Precision Plastics Ltd Polyethylene
http://www.gandmprecision.co.uk/polyethylene
8212; Main Menu —. 1000 – Natural virgin grade suitable for food contact, can work at between 120 c and -200 c. the most heat resistant of the polyethylenes. 100-green/black (regenerated) – Cost effective and ideal for change parts in bottling and canning industries. Is made of a part new and part recycled material and has long life. HML500 – Good chemical resistance, food approved and repels moisture, it is extensively used in the dairy and preserving industry. Excellent abrasive wear resistance.
gandmprecision.co.uk
G & M Precision Plastics Ltd Nylon 66
http://www.gandmprecision.co.uk/nylon-66
8212; Main Menu —. Is the hardest of the unmodified Nylons alhough Nylon 6 exibits greater impact resistance. Moisture absorption of both Nylon 6 and Nylon 66 can be as high as 10% at saturation and dimensional changes can occur due to moisture pick up. The low frictional characteristics of Nylon 6 and Nylon 66 result in wear parts with long life and in many instances eliminate the need for lubrication. To get in touch, call us on 0141 952 7461 or fill in the contact form below. Unit 2 Fleming Court.
gandmprecision.co.uk
G & M Precision Plastics Ltd Polyurethane
http://www.gandmprecision.co.uk/polyurethane
8212; Main Menu —. Solid Polyurethane is a wear resistant plastic, it can be supplied in different hardnesses thus changing its many qualities. The hardness is determined by a chemical reaction during manufacture to run slower or faster. it is available from 35 – 90 shore hardness. To get in touch, call us on 0141 952 7461 or fill in the contact form below. G & M Precision Plastics. Unit 2 Fleming Court. Copy 2014 G and M Precision Plastics.
SOCIAL ENGAGEMENT