calebsdriftboat.blogspot.com
Building the "Kingfisher" Drift Boat: January 2008
http://calebsdriftboat.blogspot.com/2008_01_01_archive.html
Building the "Kingfisher" Drift Boat. An informational blog following my senior project. Thursday, January 24, 2008. As hoped everything is still going smoothly with the side panels. As a little refreshment of the past, I had some issues involving the heating in the shop. The shop is heated by an L shaped ceiling heater that works VERY well.almost TOO well. In the picture below, you can see how it is directly over my work space. One side with applied flow coat). Both sides coated and drying). Not a whole...
calebsdriftboat.blogspot.com
Building the "Kingfisher" Drift Boat: March 2008
http://calebsdriftboat.blogspot.com/2008_03_01_archive.html
Building the "Kingfisher" Drift Boat. An informational blog following my senior project. Sunday, March 30, 2008. Boat Flipped for bottom work). Chines and Transom rounded). Chines with peanut butter epoxy applied). Chines ready for Biaxial Tape). Chines Taped ands drying). Wet-out table for tape and pedestals). Forward and Aft level floors glassed). Friday, March 28, 2008. Boat is looking great and can't wait to share with everyone! Sunday, March 9, 2008. I knows it been a while.but it was worth it!
calebsdriftboat.blogspot.com
Building the "Kingfisher" Drift Boat: Feb. 1st-3rd
http://calebsdriftboat.blogspot.com/2008/02/feb-1st-3rd.html
Building the "Kingfisher" Drift Boat. An informational blog following my senior project. Saturday, February 16, 2008. Today I spent on the bottom half of the bottom panel. First, I remade my sac sheets and covered them in plastic to place my bottom panels on. Then , I glued the key joint of the bottom panel together with the peanut butter like epoxy compound. And lastly, I glued the butt joints of the side pieces for extra width. Bottom panels ready for assembly and epoxy). Bottom key joint assembled).
calebsdriftboat.blogspot.com
Building the "Kingfisher" Drift Boat: December 2007
http://calebsdriftboat.blogspot.com/2007_12_01_archive.html
Building the "Kingfisher" Drift Boat. An informational blog following my senior project. Friday, December 14, 2007. Unsanded scarf joint, notice cured 'peanut butter' epoxy). Nicely sanded scarf joints). Side panels ready for fiberglassing! Another day another dollar (Day 3). Large hole in Plascore due to no plastic between board and joint). Clear epoxy on left used to pre-wet scarf joints and 'Peanut butter' epoxy on right used to glue the joints). Scarf joints on side panels wet out with clear epoxy).
calebsdriftboat.blogspot.com
Building the "Kingfisher" Drift Boat: Progress....
http://calebsdriftboat.blogspot.com/2008/03/progress.html
Building the "Kingfisher" Drift Boat. An informational blog following my senior project. Friday, March 28, 2008. Well it took me a week to find someone to help me flip the boat and then another week before I could get time to really work on it. I spent some time last week squaring the chines and evening them to the bottom. Tomorrow I will be rounding and finishing the chines including fiberglassing them. I will include pictures with my updates report Sunday night! Looking for an update! Sponsors will rec...
calebsdriftboat.blogspot.com
Building the "Kingfisher" Drift Boat: November 2007
http://calebsdriftboat.blogspot.com/2007_11_01_archive.html
Building the "Kingfisher" Drift Boat. An informational blog following my senior project. Wednesday, November 28, 2007. I am also accepting sponsorships now through paypal. Anyone interested in sending any funds what so ever to support my project can now do so with paypal by emailing me at 2pleasant (at) comcast (dot) net. Subscribe to: Posts (Atom). View my complete profile. Welcome to my Blog! How You Can Sponsor My Senior Project. Sponsors will receive an 8x10 print without matte and frame. Peter Viano...
calebsdriftboat.blogspot.com
Building the "Kingfisher" Drift Boat: Pedestals Chines and Level Floors! April 5th and 6th
http://calebsdriftboat.blogspot.com/2008/04/pedestals-chines-and-level-floors-april.html
Building the "Kingfisher" Drift Boat. An informational blog following my senior project. Tuesday, April 8, 2008. Pedestals Chines and Level Floors! April 5th and 6th. Forward level floor with one side laminated). Aft pedestal with face plate installed and top setting on top). Please dont say demo accounts i have many im talking about training in trading stocks and forex by computer. What is the best software to learn trading stocks and forex. January 3, 2010 at 3:58 AM. January 10, 2010 at 7:36 AM. Http:...
calebsdriftboat.blogspot.com
Building the "Kingfisher" Drift Boat: February 2008
http://calebsdriftboat.blogspot.com/2008_02_01_archive.html
Building the "Kingfisher" Drift Boat. An informational blog following my senior project. Saturday, February 16, 2008. Today I spent on the bottom half of the bottom panel. First, I remade my sac sheets and covered them in plastic to place my bottom panels on. Then , I glued the key joint of the bottom panel together with the peanut butter like epoxy compound. And lastly, I glued the butt joints of the side pieces for extra width. Bottom panels ready for assembly and epoxy). Bottom key joint assembled).
calebsdriftboat.blogspot.com
Building the "Kingfisher" Drift Boat: Chines and Pedestals..
http://calebsdriftboat.blogspot.com/2008/03/chines-and-pedestals.html
Building the "Kingfisher" Drift Boat. An informational blog following my senior project. Sunday, March 30, 2008. Boat Flipped for bottom work). Chines and Transom rounded). Chines with peanut butter epoxy applied). Chines ready for Biaxial Tape). Chines Taped ands drying). Wet-out table for tape and pedestals). Forward and Aft level floors glassed). When are we going to get an update. I was enjoying watching your progress. June 6, 2008 at 10:11 AM. February 26, 2010 at 9:05 AM. March 3, 2010 at 9:56 PM.
calebsdriftboat.blogspot.com
Building the "Kingfisher" Drift Boat: October 2007
http://calebsdriftboat.blogspot.com/2007_10_01_archive.html
Building the "Kingfisher" Drift Boat. An informational blog following my senior project. Monday, October 29, 2007. Today the first a several meetings takes place to discuss the construction. Of my boat. We will go over a timeline of events and try and set guidelines. On things I need to complete in order to successfully. Filling out the paperwork associated. With this senior project. Seven hundred black and white pamphlets. Wednesday, October 3, 2007. Today the blog of my build begins. Donation and i...
SOCIAL ENGAGEMENT