STPHOTOS.IN

naplindia.com

:: Welcome to NAPL ::

http://www.naplindia.com/bump.html

Generator and Compressors Mounts. Designed by ST Photos.

naplindia.com

:: Welcome to NAPL ::

http://www.naplindia.com/sandwich.html

Generator and Compressors Mounts. Rectangular Sandwich mountings because they feature a rubber section sandwiched between plates of metal. This arrangement allows a large difference between the compression and shear stiffnesses, thus providing the potential to 'tune' a mounting system by rotating the mountings. These mountings are commonly installed in a 'Vee' formation to utilise this feature. The Rectangular Sandwich Mountings has the following features:. Available with plate or stud fixings.

naplindia.com

:: Welcome to NAPL ::

http://www.naplindia.com/index.html

Generator and Compressors Mounts. Designed by ST Photos.

naplindia.com

:: Welcome to NAPL ::

http://www.naplindia.com/mari.html

Generator and Compressors Mounts. Smoothyfoot mountings are suitable for many different types of machinery, e.g. diesel engines, generator sets, com-pressors, fans, hydraulic units and lift machinery. Smoothy foot mountings have two rubber elements, used in shear and compression, to provide excellent stiffness characteristics for the isolation of a wide range of vibrations. A wide load range from 50 to 1280 kg. Stamped identification plates for product identification. Marine, industrial and vehicle engines.

naplindia.com

:: Welcome to NAPL ::

http://www.naplindia.com/gene.html

Generator and Compressors Mounts. GENERATOR MOUNTS and COMPRESSOR MOUNTS. Smoothyfoot mountings are suitable for many different types of machinery, e.g. diesel engines, generator sets, com-pressors, fans, hydraulic units and lift machinery. Smoothy foot mountings have two rubber elements, used in shear and compression, to provide excellent stiffness characteristics for the isolation of a wide range of vibrations. A wide load range from 50 to 1280 kg. Stamped identification plates for product identification.

naplindia.com

:: Welcome to NAPL ::

http://www.naplindia.com/gens.html

Generator and Compressors Mounts. Smoothyfoot mountings are suitable for many different types of machinery, e.g. diesel engines, generator sets, com-pressors, fans, hydraulic units and lift machinery. Smoothy foot mountings have two rubber elements, used in shear and compression, to provide excellent stiffness characteristics for the isolation of a wide range of vibrations. A wide load range from 50 to 1280 kg. Stamped identification plates for product identification. Marine, industrial and vehicle engines.

naplindia.com

:: Welcome to NAPL ::

http://www.naplindia.com/silent.html

Generator and Compressors Mounts. The Fully Bonded Bush type bushes consist of rubber bonded between concentric steel sleeves. The moulded part is subsequently ‘stress relieved’ a process which pre-stresses the rubber and improves the duty of the bush. The fully Bonded Bush type bush is designed to accommodate small torsion, conical and axial movements and endure radial loads. Natural Rubber to BS5179:1975. Highest tensile specification achieved for each hardness band. Bushes can be supplied with pins.

naplindia.com

:: Welcome to NAPL ::

http://www.naplindia.com/fac.html

Generator and Compressors Mounts. Designed by ST Photos.

naplindia.com

:: Welcome to NAPL ::

http://www.naplindia.com/tech.html

Generator and Compressors Mounts. Vibration isolation, rubber has been used in vibration isolation for a considerable time. Silentbloc, a company in UK was set up in the early part of the last century to manufacture bushes for cars. All engines and many other mechanical and electrical devices require, mounting and restraining. These mounting systems often have the added function of isolating the machine vibrations from the mountings. 3 The rubber mounting system should be capable carrying the weight of t...

naplindia.com

:: Welcome to NAPL ::

http://www.naplindia.com/rail.html

Generator and Compressors Mounts. The Fully Bonded Bush type bushes consist of rubber bonded between concentric steel sleeves. The moulded part is subsequently ‘stress relieved’ a process which pre-stresses the rubber and improves the duty of the bush. The fully Bonded Bush type bush is designed to accommodate small torsion, conical and axial movements and endure radial loads. Natural Rubber to BS5179:1975. Highest tensile specification achieved for each hardness band. Bushes can be supplied with pins.