capolight.wordpress.com
Capolight Electronics Projects. | A collection of Reprap, LED and RC projects | Page 2
https://capolight.wordpress.com/page/2
A collection of Reprap, LED and RC projects. Newer posts →. DIY Dual H-Bridge to control a Pen Plotter. April 16, 2012. In my previous post I pulled apart an old pen plotter revealing it to be controlled by two brushed DC motors. In order to power each DC motor a H-bridge. Was required but I had none on hand. However it turns out a H bridge can be constructed from a few transistors as can be seen in this useful guide. In the video you can see the two 5kOhm potentiometers. When connected to the ADC on...
econlog.econlib.org
The Future of Online Education: Three Competing Perspectives, Bryan Caplan | EconLog | Library of Economics and Liberty
http://econlog.econlib.org/archives/2012/07/the_future_of_o_1.html
January 1, 2016. I Win My Inflation Bet with Robert Murphy. December 31, 2015. Thoughts on "Almost Wholly Negative". December 30, 2015. Tina Rosenberg on Kidneys in Iran. December 30, 2015. There's no taste for accounting. December 30, 2015. December 29, 2015. December 28, 2015. The art of the possible. December 28, 2015. Two Public Choice Questions. December 26, 2015. Quote of the Day. Enter your email address for daily updates:. Instructions and more options). Join us on Facebook. JULY 8, 2012. G]oing ...
jonathancoulton.com
Jonathan Coulton
http://www.jonathancoulton.com/2012/06/20/emily-and-david
June 20th, 2012. Here’s what happened:. I retweeted Aimee Mann’s. Link to a post by David Lowery on his Trichordist blog. A post that he wrote in response to something Emily White posted on the All Songs Considered blog. You should read both posts to get up to speed. Let me know when you’re ready. Some people are asking why I retweeted that link to an argument that is very different from the one that I made in response to the MegaUpload shutdown. John Roderick tweeted a quote from Michael Penn. What if a...
capolight.wordpress.com
Richard | Capolight Electronics Projects.
https://capolight.wordpress.com/author/capoau
A collection of Reprap, LED and RC projects. I am a PhD candidate in Materials Engineering located in Melbourne, Australia. Modifying Marlin Firmware to work with a TandemB. March 22, 2015. In previous posts I built a prototype ‘TandemB’ which can be thought of as a 2D Delta printer in terms of its x and y-axis movement. This prototype could be moved about under its own power but that had no compatible firmware … Continue reading →. Construction of a TandemB Prototype. March 8, 2015. February 21, 2015.
blog.brixandersen.dk
RepRap Thermal Imaging – blog.brixandersen.dk
http://blog.brixandersen.dk/2012/07/06/reprap-thermal-imaging
Ever since I wired up the heated build plate. And extruder hot end to my RepRap, I’ve wanted to verify the thermal temperatures and heat distribution. For starters, I have used a cheap infrared thermometer, which is fine for verifying the temperatures, but not very well suited for verifying heat distribution. Last week, I got my hands on a Fluke Ti25 Thermal Imager. 8211; perfect for getting a good look at the heat distribution! Prusa PCB Heat Bed. Or should that be 0.4572 mm. July 6, 2012. I noticed the...
garyhodgson.com
garyhodgson.com/reprap » RepRap Developer Bookshelf
http://garyhodgson.com/reprap/reprap-developer-bookshelf
Wade’s Extruder Instructions. Much of the information found in the earlier RepRap blogs is still very relevant today and makes for invaluable reading for anyone interested in developing parts and printers or interested in how the project has reached the state it currently is in. The following books are collections of these posts repackaged into formats suitable for e-book readers and offline browsing. The books are also mirrored on the RepRap Wiki. HydraRaptor The story so far. Leave a Reply Cancel reply.
capolight.wordpress.com
Working in Tandem – Unconventional XY-axis layouts for 3D printing, laser cutting, CNC milling, engraving or pick and place. | Capolight Electronics Projects.
https://capolight.wordpress.com/2015/02/21/working-in-tandem
A collection of Reprap, LED and RC projects. Bootstrapping a pen plotter to make a 3d printer. Construction of a TandemB Prototype →. Working in Tandem – Unconventional XY-axis layouts for 3D printing, laser cutting, CNC milling, engraving or pick and place. February 21, 2015. Note: If anyone is aware of what the correct names are for these types of designs then please let me know by leaving a comment. But can also be thought of as one third of a Stewart platform. The build area (the area swept by the el...
capolight.wordpress.com
Current Projects | Capolight Electronics Projects.
https://capolight.wordpress.com/current-projetcs
A collection of Reprap, LED and RC projects. This is a short list of current projects. Due to work commitments I am currently taking a break from all projects. November 26, 2012 at 1:59 pm. January 12, 2013 at 8:32 pm. Hi there, would you have any interest in a Houston Instrument HiPlot DMP-29 Plotter? Wishing to get rid of one for $50 or less – do you know where i could find some interest for it? Drop me a line – im in melbourne. March 14, 2013 at 3:46 pm. September 21, 2014 at 3:21 pm. Has since taken ...
capolight.wordpress.com
Construction of a TandemB Prototype | Capolight Electronics Projects.
https://capolight.wordpress.com/2015/03/08/construction-of-tandemb-prototype
A collection of Reprap, LED and RC projects. Working in Tandem – Unconventional XY-axis layouts for 3D printing, laser cutting, CNC milling, engraving or pick and place. Modifying Marlin Firmware to work with a TandemB →. Construction of a TandemB Prototype. March 8, 2015. In a previous post. In this post I cover the construction of a ‘TandemB’ design which will be used for further experimentation. The sketchup models shown previously (available here. The material chosen for construction was a 14mm thick...
