andykellett.com
FishGuy876's Blog | CNC Bender Upgrade
http://www.andykellett.com/cnc-projectshardware/cnc-bender-upgrades
The Inner Workings Of A Coders Brain. 8220;Sir Clive”. Each newly upgraded machine will try to match the following new hardware requirements:. Parker ModuFlex Air Controllers. Custom Built Logic Board. 8211; Each machine uses a custom logic board built by myself. This board controls every aspect of the machine, including the emergency stop, limit switches, alarm systems and operation of the equipment itself. Each board is slightly adjusted to the machine based on size and operation constraints...8211;...
andykellett.com
FishGuy876's Blog | Schleuniger Stuff
http://www.andykellett.com/cnc-projectshardware/schleuniger-stuff
The Inner Workings Of A Coders Brain. 8220;Sir Clive”. You can help me on a SCHLEUNIGER MP 8015? We can try to help you troubleshoot some basic problems, for hardware issues you should contact Schleuniger directly for support on the equipment 🙂 If you visit http:/ www.schleuniger.com/sales-services/local-partners/europe/. You should be able to find someone close to you that might be able to help. Thanks. Or visit our website at http:/ www.tenborgtechnologies.com. Are these still available? Hi Dr Meyers,.
andykellett.com
FishGuy876's Blog | Amiga 1200 Power Supply Made From An Old ATX Power Supply
http://www.andykellett.com/2015/03/28/amiga-1200-power-supply-made-from-an-old-atx-power-supply/nggallery/slideshow
The Inner Workings Of A Coders Brain. 8220;Sir Clive”. Laquo; Slacking Period Commencing :). Amiga 1200 Power Supply Made From An Old ATX Power Supply. As with all things power related, if you plan on trying to make one of these things at home, make sure it is unplugged and de-energized! I will not be held responsible for anyone electrocuting themselves! So, what do we need to get going? An old ATX power supply, any size will do. I used an old 250watt supply. An old Amiga Power Supply or Power Connector.
andykellett.com
FishGuy876's Blog | FishGuy876
http://www.andykellett.com/author/FishGuy876
The Inner Workings Of A Coders Brain. 8220;Sir Clive”. Programmer, Geek, Beer Drinker. Home page: http:/ www.cvgm.net. Amiga 1200 Power Supply Made From An Old ATX Power Supply. As with all things power related, if you plan on trying to make one of these things at home, make sure it is unplugged and de-energized! I will not be held responsible for anyone electrocuting themselves! So, what do we need to get going? An old ATX power supply, any size will do. I used an old 250watt supply. Due to the ATX powe...
andykellett.com
FishGuy876's Blog | Litecoin Miner Status
http://www.andykellett.com/discography/litecoin-miner-status
The Inner Workings Of A Coders Brain. 8220;Sir Clive”. Current Version: 1.0.0. For Windows XP (SP3) and Above). Release Date: April 15th, 2013. Litecoin Miner status is a small tool designed to monitor Litecoin mining across multiple pools. It analyzes the pool and worker data and provides you with an easy view of your mining status across each pool. Know at a glance just how much coin you have mined, or are due to receive, combined across all supported mining pools! Pool-X ( http:/ pool-x.eu. Netcode Il...
carpentermfg.com
Wire Strippers, Wire Cutters, Tubing Cutters, Medical Tubing Cutters, Cable Strippers, V-Blade Strippers, Pheumatic Stripper, Automatic Wire Stripper, Carpenter United States
http://carpentermfg.com/north-america-representatives
PRODUCTION WIRE PROCESSING EQUIPMENT. Automatic Cut and Strip. North America Factory Representatives. Select your state or country from the pull down menu. The Factory Representative For Alabama:. Franklin, TN 37064. Website: www.flauttassociates.com. The Factory Representative For Alaska:. Carpenter Mfg Co., Inc. Manlius, NY 13104. Website: www.carpentermfg.com. The Factory Representative For Arizona:. Carpenter Mfg Co., Inc. Manlius, NY 13104. Website: www.carpentermfg.com. 1424 Highway 62 S.W. Website...
andykellett.com
FishGuy876's Blog | NOW!
http://www.andykellett.com/discography/now
The Inner Workings Of A Coders Brain. 8220;Sir Clive”. I started working on this project on Sept. 13 with Ultrasyd, as the people who were supposed to write him a music disk had bailed out of the project. I took it on as a challenge, realizing the path would not be straight and easy, plus I have been looking for an excuse to get back into 8-bit development for quite some time 🙂. The project is written using Z88DK (available HERE. And uses C and Z80 Assembly language. I used CPCRSlib. And So We End 2010 ...
andykellett.com
FishGuy876's Blog | Amiga
http://www.andykellett.com/category/computers/amiga
The Inner Workings Of A Coders Brain. 8220;Sir Clive”. Amiga 1200 Power Supply Made From An Old ATX Power Supply. As with all things power related, if you plan on trying to make one of these things at home, make sure it is unplugged and de-energized! I will not be held responsible for anyone electrocuting themselves! So, what do we need to get going? An old ATX power supply, any size will do. I used an old 250watt supply. An old Amiga Power Supply or Power Connector. Step 2 – Acquire A Power Switch.
andykellett.com
FishGuy876's Blog | Amiga 1200 Power Supply Made From An Old ATX Power Supply
http://www.andykellett.com/2015/03/28/amiga-1200-power-supply-made-from-an-old-atx-power-supply
The Inner Workings Of A Coders Brain. 8220;Sir Clive”. Laquo; Slacking Period Commencing :). Amiga 1200 Power Supply Made From An Old ATX Power Supply. As with all things power related, if you plan on trying to make one of these things at home, make sure it is unplugged and de-energized! I will not be held responsible for anyone electrocuting themselves! So, what do we need to get going? An old ATX power supply, any size will do. I used an old 250watt supply. An old Amiga Power Supply or Power Connector.
andykellett.com
FishGuy876's Blog | FlexIO Classic
http://www.andykellett.com/discography/flexio-classic
The Inner Workings Of A Coders Brain. 8220;Sir Clive”. What Is FlexIO Classic? An updated version of FlexIO was created, and details can be found on the Pro version Here. The project came about due to the limitations of the original software being used on the machines. To put it in a nutshell, it was utter crap and was horrible to work with. Some of the many issues/problems with the software included:. There were no drivers for the controller capable of working on anything above Windows 95/98. The progra...
SOCIAL ENGAGEMENT