solidfilmlubricants.com
Slickote; Specifications, Mil Specs
http://www.solidfilmlubricants.com/Specifications.html
Lubricant Paint Mil Specs. Metal Finishing Pretreatment Mil Specs. Solid Film Lubricant Coatings.
paint-chem.com
Slickote Table of Contents Page
http://www.paint-chem.com/toc.htm
Click page to navigate. Paint-Chem, QPL, Trans Chem Coatings, Primers, Paints, Polyurethane, Epoxy. Primers, epoxy, mil-prf-23377, mil-prf-53022, wash primer, dod-p-15328, mil-c-8514. WashPrimers, DOD-P-15328, Mil-C-8514C, VY-113-3, VY-116-3, VY-117-3. Industrial Paints, polyurethane, mil-prf-85285, epoxy, mil-c-22750. Polyurethane Paint Coating Mil-PRF-85285. Epoxy Paint Coating Mil-PRF-22750. Transchem Coatings General Information. Slickote Table of Contents Page.
paint-chem.com
Links
http://www.paint-chem.com/pr03.htm
General Information on the Web. Web Links to Useful Sites. South Coast Air Quality Management District .(Refer: Rule1107 and 1124). Purchase and Research Specs/ AMS etc.). Code of Federal Regulations (CFR29-Labor, CFR40-EPA, CFR49-Transport). Calif Air Resources Board. Periodic Table of Elements. For More Information Contact:. 1811 S. Hope St. Los Angeles CA. 90015.
paint-chem.com
Industrial Paints, polyurethane, mil-prf-85285, epoxy, mil-c-22750
http://www.paint-chem.com/paints.htm
Meets MIL-PRF-85285C, High Solids, Low VOC. 2 Component, 1 Gal Kit, Air Dry Cure. Applied to pretreated metal surfaces of all types. Colors: Fed Std 595 or custom. Thickness: 1.7 to 2.3 Mil. Meets MIL-C-22750F, High Solids, Low VOC. 2 Component, 1 Gal Kit, Air Dry Cure. Applied to pretreated metal surfaces of all types. Colors: Fed Std 595. Thickness: 1.7 to 2.3 Mil. Solvent Base/ Low VOC. Cure: 350 deg F/ 20 Min. Color: Fed Std 595. Water Base Baking Enamel. Cure 350 deg F/ 20 min. Colors: Fed Std 595.
paint-chem.com
Specifications, mil-prf-85285, mil-p-23377, dod-p-15328, mil-prf-22750
http://www.paint-chem.com/specifications.htm
Epoxy Primer, White. Epoxy Primer, White Water Base. Polyurethane, Hi Solids. Epoxy Coating, High Solids. Epoxy Primer, Waterborne. Hi Heat Resistant Paint (for steel surfaces). Solvent Reducers for Coatings.
solidfilmlubricants.com
Slickote; Dry Lube, Products, Services in Los Angeles
http://www.solidfilmlubricants.com/SlickoteProducts.html
Teflon* Anti Stick Lubricant Coating. Cure: 300 deg F / 1 Hr. Black, Clear, Silver. Use for MIL-A-63576 Ty 3 Teflon Impregnation,. Anodize Seal ( 1000 Hrs Salt Spray Resistance). Apply iaw MIL-L-46010E Ty1. Solid Film Lubricant, Corrosion Inhibiting. Cure: 300 deg F / 1 Hr. Use: -90 to 400 deg F. Apply iaw MIL-L-46010E Ty2. Cure: 400 deg F / 1 Hr. Use: -90 to 400 deg F. Apply iaw MIL-L-46010E Ty 3. Cure:300 deg F/ 2 Hr or 400 deg F/1 Hr. Water Base / Low VOC. Use: -90 to 400 deg F. Cure: 300 deg F / 1 Hr.
solidfilmlubricants.com
Slickote; Application Information
http://www.solidfilmlubricants.com/ApplicationInfo.html
SOME USEFUL INFORMATION FOR APPLICATORS. Web Links to Useful Sites. South Coast Air Quality Management District. Purchase and Research Specs/ AMS etc.). Code of Federal Regulations (CFR29-Labor, CFR40-EPA, CFR49-Transport). Calif Air Resources Board. Periodic Table of Elements. Estimating Cost of Material. Sq/Ft Coverage =1600 X (%Solids /100) X (%Transfer Efficiency/ 100) / Mil Thickness. Sq/Ft= 1600 X (.40) X (.80) / (0.5) = 1024 Sq/Ft. Calculation for Coating Thickness Conversion. Material Safety Data...
solidfilmlubricants.com
Slickote MSDS, Material Safety Data Sheets
http://www.solidfilmlubricants.com/MSDS.html
MSDS-PTFE Teflon- Flat Black. MSDS-PTFE Teflon- Semi Gloss Black. MSDS-DL100- Solid Film Lubricant. Teflon is a Dupont registered trademark. Solid Film Lubricant Coatings.