reprap.weblog.tudelft.nl
October | 2009 | Augmenting Prototypes 1: RepRap 3D Printer
http://reprap.weblog.tudelft.nl/2009/10
The Reprap is an open source design for a home-made 3D printer, based on 3 linear motors and an extruder head as dispenser of thermoplastic wire. The weblogs of this year's Minor Augmenting Prototypes project:. 2 Floating wax fabbing. 5 RFID and IVF. 6 Immersion in sail simulators. Augmenting Prototypes 1: RepRap 3D Printer. Posted in October 2009. Printing more and more. Over the last couple of days we have been experimenting with the machine. Some examples lined up:. We did encounter some problems with...
reprap2010.weblog.tudelft.nl
September | 2010 | Reprap 3D Printer (minor AP 2010)
http://reprap2010.weblog.tudelft.nl/2010/09
Reprap 3D Printer (m. The Reprap is an open source design for a home-made 3D printer. This project will be dedicated to create a replication (2nd generation) Reprap. It will includes: lots of soldering, construction, experimenting with various printing materials, making test prints. This project will take place at the Science Center. The weblogs of this year's Minor Augmenting Prototypes project:. 2 Floating wax fabbing. 6 RFID and IVF. 9 Immersion in sail simulators. Reprap 3D Printer (minor AP 2010).
reprap.weblog.tudelft.nl
Fully assembled | Augmenting Prototypes 1: RepRap 3D Printer
http://reprap.weblog.tudelft.nl/2009/10/14/fully-assembled
The Reprap is an open source design for a home-made 3D printer, based on 3 linear motors and an extruder head as dispenser of thermoplastic wire. The weblogs of this year's Minor Augmenting Prototypes project:. 2 Floating wax fabbing. 5 RFID and IVF. 6 Immersion in sail simulators. Augmenting Prototypes 1: RepRap 3D Printer. As the tittle dictates we have fully assembled the complete RepRap. The frame, motors and belts all attached:. The working OLED Display:. We mounted the extruder:. Be Sociable, Share!
reprap.weblog.tudelft.nl
First things First | Augmenting Prototypes 1: RepRap 3D Printer
http://reprap.weblog.tudelft.nl/2009/09/29/first-things-first
The Reprap is an open source design for a home-made 3D printer, based on 3 linear motors and an extruder head as dispenser of thermoplastic wire. The weblogs of this year's Minor Augmenting Prototypes project:. 2 Floating wax fabbing. 5 RFID and IVF. 6 Immersion in sail simulators. Augmenting Prototypes 1: RepRap 3D Printer. As posted below our RepRap machine arrived by mail last thursday. We unpacked the components and did a quick check if everything was complete. Looks good so far. Be Sociable, Share!
reprap2010.weblog.tudelft.nl
Reprap 3D Printer (minor AP 2010) | Page 2
http://reprap2010.weblog.tudelft.nl/page/2
Reprap 3D Printer (m. The Reprap is an open source design for a home-made 3D printer. This project will be dedicated to create a replication (2nd generation) Reprap. It will includes: lots of soldering, construction, experimenting with various printing materials, making test prints. This project will take place at the Science Center. The weblogs of this year's Minor Augmenting Prototypes project:. 2 Floating wax fabbing. 6 RFID and IVF. 9 Immersion in sail simulators. Reprap 3D Printer (minor AP 2010)9.
reprap2010.weblog.tudelft.nl
Science Fair | Reprap 3D Printer (minor AP 2010)
http://reprap2010.weblog.tudelft.nl/2010/10/27/science-fair
Reprap 3D Printer (m. The Reprap is an open source design for a home-made 3D printer. This project will be dedicated to create a replication (2nd generation) Reprap. It will includes: lots of soldering, construction, experimenting with various printing materials, making test prints. This project will take place at the Science Center. The weblogs of this year's Minor Augmenting Prototypes project:. 2 Floating wax fabbing. 6 RFID and IVF. 9 Immersion in sail simulators. Reprap 3D Printer (minor AP 2010).
reprap2010.weblog.tudelft.nl
onbekend | Reprap 3D Printer (minor AP 2010)
http://reprap2010.weblog.tudelft.nl/category/118822onbekend
Reprap 3D Printer (m. The Reprap is an open source design for a home-made 3D printer. This project will be dedicated to create a replication (2nd generation) Reprap. It will includes: lots of soldering, construction, experimenting with various printing materials, making test prints. This project will take place at the Science Center. The weblogs of this year's Minor Augmenting Prototypes project:. 2 Floating wax fabbing. 6 RFID and IVF. 9 Immersion in sail simulators. Reprap 3D Printer (minor AP 2010).
SOCIAL ENGAGEMENT