wilkins-knives.com
Wilkins Knives Berlin: Fixed Blades
http://wilkins-knives.com/fixed
Once upon a time I hand ground each and every blade. This makes for an expensive knife. So in order to make a superior knife at a reasonable price, I developed a network of vendors in Europe capable of machine grinding blanks I make in my shop. Most of the fixed blades I sell are machine ground, however an awful lot of old fashioned handwork still goes into every knife. Are what I like best, I developed a new category of fixed blade I call Crossover Knives. The Ryback Bushcrafter is sold out. Is a versit...
wilkins-knives.com
Wilkins Knives Berlin: WilkinsGRIP N_Dura4
http://wilkins-knives.com/wilkinsgrip-n_dura4
The WilkinsGRIP N Dura4. Gripset is the newest addition to the WilkinsGRIP product line and the second for a product made by Spyderco. The N Dura4 fits all Spyderco Endura 4 Series. Folding knives. Each gripset consists of two grip halves, a machined back spacer with steel cross-bolt and a set of custom made, stainless Torx screws. You may reuse the original screws that came with your Endura or use the new ones included, however the factory pivot screw with washer must be reused with the new grips. These...
wilkins-knives.com
Wilkins Knives Berlin: knives in stock
http://wilkins-knives.com/knives-stocklist
These are the knives and gear I have in stock for immediate sale. Click the thumbnail for a larger pic and more information on each knife. Final Reduction: Ryback Series 2 Pattern Welded Steel by Marcus Balbach. I don’t have many of these left, 300 is as low as they go! Model: The Mytuko Mini Cobalt. Machine ground from 2.5mm German 1.4528 @ HRC58-59 a Cobalt stainless alloy with the same composition as N690 this improved Mytuko Mini is one heck of a performer, both in the kitchen and in the field. Machi...
wilkins-knives.com
Wilkins Knives Berlin: WilkinsGRIP BMG mini RL
http://wilkins-knives.com/wilkinsgrip-bmg-mini
WilkinsGRIP BMG mini RL. I’ve made the original WilkinsGRIP BMG. Grips continuously since their introduction in 2008. Recently I felt it was time to incorporate all the suggestions and ideas 7 years of experience have provided. So for 2016, I give you the WilkinsGRIP BMG. Requires no modification to the original knife and the stock pocket clip may be mounted on either side with the factory screws for full ambidextrous carry. I will continue to sell the original BMG. Flame Orange is Back! Hardcoat anodize...
wilkins-knives.com
Wilkins Knives Berlin: WilkinsGRIPs in stock
http://wilkins-knives.com/wilkinsgrip-stocklist
Stainless clips are shipping now, including 3 black 1/4” 2-56 UNC. T8 Torx screws. These clips fit any knife that accepts the standard Benchmade, 3-hole clip pattern. Laser marked with my W-Logo or sterile. Mini and mini RL grips. Now include four black 1/8” 2-56 UNC. Screws with a T8 Torx head free. These screws hold the liners in the grips and I have received reports from customers that Benchmade is using a LOT. Alu grips have been discontinued. These are the ONLY. Accept custom grip orders! OK, but th...
wilkins-knives.com
Wilkins Knives Berlin: mytuko cobalt
http://wilkins-knives.com/mytuko-cobalt
Is the ideal all-purpose kitchen knife for tasks where you prefer a shorter blade. Its 105mm (4.13”) blade is tall enough at 44mm (1.73”) to keep your knuckles off the cutting board and still get some real chopping done. 58-59 this steel is tough enough to take some abuse without chipping and is not too difficult to resharpen using stones. The leather sheaths are ready and in stock, see the knives in stock page for specs and prices! Construction: slab grips, exposed tang. Max blade height: 44mm. The curr...
wilkins-knives.com
Wilkins Knives Berlin: in stock
http://wilkins-knives.com/in-stock
I now have two in stock pages instead of just a single monster page. Which should make it easier for visitors to find specific products without waiting for everything to load. So select the area you’re most interested in: WilkinsGRIPs or Knives. Check the order info. Page for information regarding ordering, payment and shipping before contacting me with questions. Chances are, the answer to your question is right there. Each knife or WilkinsGRIP product includes a Velcro-backed, soft PVC.
wilkins-knives.com
Wilkins Knives Berlin: mini thorn tactical
http://wilkins-knives.com/mini-thorn-tactical
I wanted a small, robust knife for neck, belt or pocket carry and with its ergonometric grip, the Mini Thorn Tactical. Fits even large hands and the deep curve prevents the finger from contacting the cutting edge. I offer a wide choice of grip scales, ranging from selected wood to titanium and glass fiber composite. For an even slimmer knife, the grips are easily removed. Steel type: Sandvik 14C28N. Steel thickness: 3.9mm. Max blade height: 30mm. Buyers have also been fond of another shade of green: Toxi...
wilkins-knives.com
Wilkins Knives Berlin: mytuko mini cobalt
http://wilkins-knives.com/mytuko-mini
The Mytuko Mini Cobalt. Is a big, little knife. Just like the original Mytuko Mini it replaces … only the Mytuko Mini Cobalt incorporates all the little improvements that I’ve come up with as well as those suggested by customers over the years. The Mytuko Mini Cobalt. Is flat ground to a fine cutting edge from 2.5mm 1.4528 Cobalt alloyed stainless steel. This German-made steel has the same composition as N690. The initial run of Mytuko Mini Cobalts have USA. Made Olive Green Canvas Micarta grips. Made in...
wilkins-knives.com
Wilkins Knives Berlin: basic field knife
http://wilkins-knives.com/basic-military
The Basic Field Knife. Every Basic Field Knife now comes complete with a Spec-ops Combat Master Mini sheath in your choice of Black or Coyote Cordura. The Spec-ops Combat Master series sets the standard for tactical sheaths. Spec-ops designed this smaller version with my Basic Field Knife in mind, incorporating the same features found on all Combat Master Sheaths. Steel type: Sandvik 14C28N or Becut stainless. Steel thickness: 4.2mm. Max blade height: 35mm. The grips on the Basic Field Knife are so desig...
SOCIAL ENGAGEMENT