ccna-exam-modules.blogspot.com
4.0 CCNA-EXAM-MODULES: 4.0CCNA 1: Network Fundamentals:ModuleFinal1
http://ccna-exam-modules.blogspot.com/2009/08/40ccna-1-network-fundamentalsmodulefina.html
40CCNA 1: Network Fundamentals:ModuleFinal1. A PC can not connect to any remote websites, ping its default gateway, or ping a printer that is functioning properly on the local network segment. Which action will verify that the TCP/IP stack is functioning correctly on this PC? Use the ipconfig /all. Command at the host’s command prompt. Use the ping 127.0.0.1. Command at the command prompt. Command at the command prompt to identify any failures on the path to the gateway. Only computer A and computer D.
ccna-exam-modules.blogspot.com
4.0 CCNA-EXAM-MODULES: 4.0CCNA 1: Network Fundamentals:Module2
http://ccna-exam-modules.blogspot.com/2009/08/40ccna-1-network-fundamentalsmodule2.html
40CCNA 1: Network Fundamentals:Module2. 1 Which two layers of the OSI model have the same functions as the TCP/IP model Network Access Layer? 2 What is a primary function of the trailer information added by the data link layer encapsulation? Ensures ordered arrival of data. Provides delivery to correct destination. Identifies the devices on the local network. Assists intermediary devices with processing and path selection. 3 During the encapsulation process, what occurs at the data link layer? Applicatio...
ccna-exam-modules.blogspot.com
4.0 CCNA-EXAM-MODULES: 4.0 CCNA 2: Routing Protocols and Concepts:Module 3
http://ccna-exam-modules.blogspot.com/2009/08/40-ccna-2-routing-protocols-and_10.html
40 CCNA 2: Routing Protocols and Concepts:Module 3. 1 Which two statements correctly describe the concepts of administrative distance and metric? Administrative distance refers to the trustworthiness of a particular route. A router first installs routes with higher administrative distances. The value of the administrative distance can not be altered by the network administrator. Routes with the smallest metric to a destination indicate the best path. The metric is always determined based on hop count.
cisco-tutorials.blogspot.com
CISCO TUTORIALS: 3.1 CCNA 4 - Voucher Exam
http://cisco-tutorials.blogspot.com/2009/09/31-ccna-4-voucher-exam.html
40 CCNA EXAM MODULES. 31 CCNA 4 - Voucher Exam. Which automatic process is started first whenever power. Is applied to a Cisco router? Empties contents of NVRAM. Looks for the configuration file. Starts the operating system. Which of the following commands sets a condition to allow. Packets through a named ACL? Which of the following authentication processes provides. Protection against playback attacks? Which command displays the active configuration of a router? Sum of the costs based on bandwidth.
cisco-tutorials.blogspot.com
CISCO TUTORIALS: 3.1 CCNA 1 - Final Exam 2
http://cisco-tutorials.blogspot.com/2009/09/31-ccna-1-final-exam.html
40 CCNA EXAM MODULES. 31 CCNA 1 - Final Exam 2. A router determines the path to deliver a packet. What layer of the OSI model does this fact represent? Refer to the exhibit. A network administrator has configured a. Network after subnetting the network number 192.168.0.0/28. Workstation 1 is not able to communicate with Workstation 2. What is the cause of this loss in communications? Workstation 1 and Workstation 2 are on the same subnet. The serial connections are using addresses from the LAN subnets.
cisco-tutorials.blogspot.com
CISCO TUTORIALS: 3.1 CCNA 1 - Module 10
http://cisco-tutorials.blogspot.com/2009/09/31-ccna-1-module-10.html
40 CCNA EXAM MODULES. 31 CCNA 1 - Module 10. How does a router decide where the contents of a received frame should be forwarded? By matching destination IP addresses with networks in the routing table. By matching the destination IP address with IP addresses listed in the ARP table. By matching the destination MAC address with MAC addresses listed in the CAM table. By forwarding the frame to all interfaces except the interface on which the frame was received. Subnetwork has 14 usable host IP addresses.
cisco-tutorials.blogspot.com
CISCO TUTORIALS: 3.1 CCNA 1 - Module 7
http://cisco-tutorials.blogspot.com/2009/09/31-ccna-1-module-7.html
40 CCNA EXAM MODULES. 31 CCNA 1 - Module 7. How does 1000BASE-T use the UTP wire pairs to accomplish. Two pairs are used to transmit and two pairs are used to receive. One pair is used to transmit, one pair is used to receive, one pair. Is used for clocking, and one pair is used for error correction. All four pairs are used in parallel by both hosts to transmit and receive simultaneously. Two pairs of wires are used as in 10BASE-T and 100BASE-TX. Which RJ-45 pins are used to transmit and receive data in.
cisco-tutorials.blogspot.com
CISCO TUTORIALS: 3.1 CCNA 1 - Module 8
http://cisco-tutorials.blogspot.com/2009/09/31-ccna-1-module-8.html
40 CCNA EXAM MODULES. 31 CCNA 1 - Module 8. A network administrator has a multi-floor LAN to monitor and. Maintain. Through careful monitoring, the administrator has. Noticed a large amount of broadcast traffic slowing the network. Which device would you use to best solve this problem? What is the function of a Layer 2 switch? Forwards data based on logical addressing. Duplicates the electrical signal of each frame to every port. Learns the port assigned to a host by examining the destination. Segments 3...
cisco-tutorials.blogspot.com
CISCO TUTORIALS: 3.1 CCNA 1 - Module 3
http://cisco-tutorials.blogspot.com/2009/09/31-ccna-1-module-3.html
40 CCNA EXAM MODULES. 31 CCNA 1 - Module 3. What factors should be considered when selecting. The appropriate cable for connecting a PC to a network? Type of system bus. Distance of cable run. What are two advantages of using UTP cable in a networking. Is stiffer than STP. Is less expensive than fiber. Is easier to install than coaxial. Provides longer distances than coaxial provides. Is less susceptible to outside noise sources than fiber is. What must be changed on every host on the network? Decimal en...
cisco-tutorials.blogspot.com
CISCO TUTORIALS: 3.1 CCNA 2 - Module 1
http://cisco-tutorials.blogspot.com/2009/09/31-ccna-2-module-1.html
40 CCNA EXAM MODULES. 31 CCNA 2 - Module 1. Which of the following devices are used in the. Construction of a WAN? Which basic components do a router and a standard. Desktop PC have in common? Which router component holds the configuration file. When power is lost? Volatile random access memory. Non-volatile random access memory. Which of the following descriptions are true regarding. The management connections on a Cisco router? They are non-network connections. They are synchronous serial ports. Establ...
